Difference between revisions of "Reset Physical Button"

From How to: Dobbly
Jump to navigation Jump to search
(Created page with "Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the knob is not properly disengaged. Resetting the knob is simple: 1. On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button. 2. Take a pen, skewer or pencil. 3. Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the ph...")
 
(Marked this version for translation)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the knob is not properly disengaged. Resetting the knob is simple:
<languages/>
<translate>
<!--T:1-->
Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the button is not properly disconnected. Resetting the button is simple:


1. On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button.
<!--T:2-->
# On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button.
# Take a pen, skewer or pencil.
# Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the physical push button. You will see a red LED light blinking.
# Press the reset button for at least 5 seconds. The red LED light will change from slow blinking to fast blinking.


2. Take a pen, skewer or pencil.
<!--T:3-->
 
The physical Luqo button has been reset!
3. Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the physical push button. You will see a light blink.
</translate>
 
4. Press the reset button for at least 5 seconds. The red LED will change from slow blinking to fast blinking.
 
5. The physical Luqo button is reset!

Latest revision as of 20:50, 16 May 2022

Other languages:

Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the button is not properly disconnected. Resetting the button is simple:

  1. On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button.
  2. Take a pen, skewer or pencil.
  3. Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the physical push button. You will see a red LED light blinking.
  4. Press the reset button for at least 5 seconds. The red LED light will change from slow blinking to fast blinking.

The physical Luqo button has been reset!