Reset Physical Button

From How to: Dobbly
Revision as of 19:50, 16 May 2022 by Rogier (talk | contribs) (Created page with "Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the knob is not properly disengaged. Resetting the knob is simple: 1. On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button. 2. Take a pen, skewer or pencil. 3. Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the ph...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Although it rarely happens, sometimes the button needs to be reset. This is the case, for example, when the knob is not properly disengaged. Resetting the knob is simple:

1. On the bottom of the button is a hole, right next to the USB-C port. Above the hole it says "reset". In that hole is a small white button: the reset button.

2. Take a pen, skewer or pencil.

3. Make sure the physical Luqo button is on and disconnected from the Dobbly App. To switch on, press the physical push button. You will see a light blink.

4. Press the reset button for at least 5 seconds. The red LED will change from slow blinking to fast blinking.

5. The physical Luqo button is reset!