Translations:Connect Physical Button/5/en

1. Via the menu option "Button", the Button screen is opened (Figure 3, with physical button activated). There is a grey "Start scan" button, below is the Status text. The start text of the Status text is "Ready to scan".
2. Press the physical Luqo button to bring it out of sleep mode. So this is actually a very big "On" button too!
3. Press the grey "Start scan" button (Figure 3). The available physical Luqo buttons will be found one by one and placed under the status text (Figure 4). The physical Luqo buttons have long names, but always start with LUQO followed by the abbreviation of the colour (R = Red, G = Green, B = Blue, Y = Yellow).
4. Press the grey button with the name of the physical Luqo button to be connected. The status text will change (Figure 5). Once the physical Luqo button is connected, the text of the grey button will change (it will say "connected") and the status text in the upper row will indicate that the button is connected (Figure 6).